JAI PULNiX Main

JAI CV-A60 Megapixel Camera General Description

Detailed PDF spec sheet   /  JAI PULNiX Monochrome Cameras

The new, compact A-series has a footprint of merely 44 x 66 mm (width x length) and height of 29 mm and boasts a long list of new functions and features. These include RS 232C control of all settings of the camera, a number of new trigger modes and readout modes. The target market for this camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).

Specifications

Specifications

CCIR

EIA

Scanning system 625 lines 25frames/sec. 525 lines  30frames/sec.
     CCD sensor CV-A50       CCD sensor CV-A60          Monochrome 1/2" IT CCD           Monochrome 1/3" IT CCD

Sensing area            CV-A50 CV-A60

                   6.4 (h) x 4.8 (v) mm                    4.9 (h) x 3.7 (v) mm
Effective pixels 752 (h) x 582 (v) 768 (h) x 494 (v)
Pixels in video output 737 (h) x 575 (v) 758 (h) x 486 (v)

Cell size                     CV-A50 CV-A60

8.6 (h) x 8.3 (v) µm 6.5 (h) x 6.25 (v) µm 8.4 (h) x 9.8 (v) µm  6.35 (h) x 7.4 (v) µm
Resolution horizontal 570 TV lines
Sensitivity on sensor

CV-A50

CV-A60

 

0.03 Lux, Max. gain, 50% video

0.05 Lux, Max. gain, 50% video

S/N ratio                     CV-A50 CV-A60

            59 dB             58 dB             60 dB             59 dB
 Video output Composite VS signal, 1.0 Vpp, 75 Ω           
Gamma 0.45 or 1.0
Gain

Gain Range

Manual - Automatic

0 to +15 dB

Accumulation Field - Frame
Synchronization Int. X-tal. Ext HD/VD or random trigger
Scanning 2:1 interlaced, non-interlaced
HD sync. input/output 4 V, 75 Ω
Trigger input 4 V, 75 Ω
WEN output (write enable) 4 V, 75 Ω
EEN out. (exposure enable) 4 V, 75 Ω
Pixel clock output 4 V, 75 Ω
Shutter (Off), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 sec.
Pulse width control 1.5 H to 1000 H
Start / stop 1/50 to 1/10,000 sec. 1/60 to 1/10,000 sec.
Long time exposure 1 field to ∞
Programmable exposure 2.5 H to 252.5 H
Frame delay readout Time from PWC trigger input to ext. VD input
Functions controlled by    RS 232C Scanning format, Trigger mode, Shutter speed, Trigger/WEN polarity, Accumulation, Shutter mode, Programmable exposure, AGC level, White clip, Setup, Manual gain, AGC/manual gain, Internal/potentiometer gain set, Gamma, Pixel clock, Commands and internal adjustments.
Functions controlled by  DIP switches VD input/output, HD input/output, internal HD and  VD 75 Ω termination on/off
Operating temperature -5°C to +45°C
Humidity 20 - 80 % non-condensing
Storage temp./humidity -25°C to 60°C/20% - 90%
Power 12 V DC ± 10%. 1.5 W
Lens mount C-mount
Dimensions 29 x 44 x 66 mm (HxWxD)
Weight 150 g

Last Updated Monday May 08, 2006