JAI CV-A50 Camera General Description
Detailed PDF spec sheet / JAI PULNiX Monochrome Cameras
The new, compact A-series has a footprint of merely 44 x 66 mm (width x length) and height of 29 mm and boasts a long list of new functions and features. These include RS 232C control of all settings of the camera, a number of new trigger modes and readout modes. The target market for this camera family is volume OEMs (Original Equipment Manufacturers) and high level System Integrators for Automated Imaging applications (e.g. industrial/medical equipment).
Specifications
| Specifications |
CCIR |
EIA |
|---|---|---|
| Scanning system | 625 lines 25frames/sec. | 525 lines 30frames/sec. |
| CCD sensor CV-A50 CCD sensor CV-A60 | Monochrome 1/2" IT CCD Monochrome 1/3" IT CCD | |
|
Sensing area CV-A50 CV-A60 |
6.4 (h) x 4.8 (v) mm 4.9 (h) x 3.7 (v) mm | |
| Effective pixels | 752 (h) x 582 (v) | 768 (h) x 494 (v) |
| Pixels in video output | 737 (h) x 575 (v) | 758 (h) x 486 (v) |
|
Cell size CV-A50 CV-A60 |
8.6 (h) x 8.3 (v) µm 6.5 (h) x 6.25 (v) µm | 8.4 (h) x 9.8 (v) µm 6.35 (h) x 7.4 (v) µm |
| Resolution horizontal | 570 TV lines | |
| Sensitivity on sensor CV-A50 CV-A60 |
0.03 Lux, Max. gain, 50% video 0.05 Lux, Max. gain, 50% video |
|
|
S/N ratio CV-A50 CV-A60 |
59 dB 58 dB | 60 dB 59 dB |
| Video output | Composite VS signal, 1.0 Vpp, 75 Ω | |
| Gamma | 0.45 or 1.0 | |
| Gain Gain Range |
Manual - Automatic 0 to +15 dB |
|
| Accumulation | Field - Frame | |
| Synchronization | Int. X-tal. Ext HD/VD or random trigger | |
| Scanning | 2:1 interlaced, non-interlaced | |
| HD sync. input/output | 4 V, 75 Ω | |
| Trigger input | 4 V, 75 Ω | |
| WEN output (write enable) | 4 V, 75 Ω | |
| EEN out. (exposure enable) | 4 V, 75 Ω | |
| Pixel clock output | 4 V, 75 Ω | |
| Shutter | (Off), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10,000 sec. | |
| Pulse width control | 1.5 H to 1000 H | |
| Start / stop | 1/50 to 1/10,000 sec. 1/60 to 1/10,000 sec. | |
| Long time exposure | 1 field to ∞ | |
| Programmable exposure | 2.5 H to 252.5 H | |
| Frame delay readout | Time from PWC trigger input to ext. VD input | |
| Functions controlled by RS 232C | Scanning format, Trigger mode, Shutter speed, Trigger/WEN polarity, Accumulation, Shutter mode, Programmable exposure, AGC level, White clip, Setup, Manual gain, AGC/manual gain, Internal/potentiometer gain set, Gamma, Pixel clock, Commands and internal adjustments. | |
| Functions controlled by DIP switches | VD input/output, HD input/output, internal HD and VD 75 Ω termination on/off | |
| Operating temperature | -5°C to +45°C | |
| Humidity | 20 - 80 % non-condensing | |
| Storage temp./humidity | -25°C to 60°C/20% - 90% | |
| Power | 12 V DC ± 10%. 1.5 W | |
| Lens mount | C-mount | |
| Dimensions | 29 x 44 x 66 mm (HxWxD) | |
| Weight | 150 g | |
Last Updated Monday May 08, 2006